Silky Fox Pole Saws

The Zubat Pole Saw is a lightweight, state of the art, telescopic pole saw with an oval shaped aluminium alloy pole which offers both strength and precise control. This is a very versatile product with a wide range of uses including trimming, pruning, gardening, forestry and arboriculture.

The telescopic design has two locking systems – a spring loaded locking button and friction clamps which work in tandem to ensure a strong and stable pole extension.

These lightweight poles can be used from the ground or climbed with to gain greater pruning range without the use of heavier, more cumbersome equipment.

It is designed with a single extension pole but comes in three different sizes :-

1200 with an extension range of 1.75-2.65m
1500 with an extension range of 2.00-3.30m
1800 with an extension range of 2.35-3.85m

The saw has a curved blade with a standard teeth ratio of 7.5 teeth per 30mm.

The Zubat Pole Saw uses the same blade as the Zubat Professional 330mm Hand Saw. The blades are fully interchangeable offering added flexibility. A black rigid-plastic blade guard is included, which locks onto the blade for extra protection. The base poles have pole-end shock absorbers and a comfortable rubberised over-grip which ensures good hold and control.

Zubat blades cannot be re-sharpened due to the use of electro-impulse hardening in the manufacturing process. Replacement blades are available and only require the removal of two bolts to effect the blade change. All other parts are also replaceable.

To extend the Zubat Pole Saw, the clamps must be released and poles extended from the bottom up and closed from the top down.

It is important that both locking systems are used to ensure the structural rigidity of the extended poles. Spring loaded locking buttons allow multiple length adjustment and safety friction clamps hold the extensions firmly in place.

As with all Silky Saws, the cut is on the pull stroke which means the blade will be under tension and will not bow.

Let the blade do the work for you.

Never force the blade on the push stroke as you will be pushing against the direction of the teeth – if the blade becomes caught, do not push hard against it. Carefully take the pressure off the blade in order to release the saw.

The Zubat Pole Saw should always be stored in the closed position with the blade guard in place. They should also be cleaned of any debris/dirt to ensure a smooth opening operation. The blade should ideally be cleaned with a solvent – this will help to prolong the life of the blade.

WARNING. DO NOT USE POLE SAWS WITHIN 15M OF POWER LINES OR ELECTRICAL WIRES. Failure to heed this warning may result in serious injury or death by electrocution.

WARNING. NEVER CUT DIRECTLY ABOVE YOUR HEAD. Always consider where falling branches will land on the ground. We strongly recommend the use of protective hard hats and glasses when using pole saws.

WARNING. Silky Saws are extremely sharp so please be careful when using and keep away from children. Improper use can cause serious injury.

MANUFACTURER WARNING. Incorrect use of a Silky Saw may cause injury. Silky, its affiliates, subsidiaries, importers, distributors and dealers are not responsible for and shall not be liable for any fatality, injury, loss, or damage resulting from the use of its saws.

The Zubat Pole Saw is telescopic and is constructed of aluminium alloy. The poles are lightweight and oval in shape which provides extra strength and rigidity and minimises bend when fully extended. This gives the user greater control over the direction of the blade when cutting.

In addition there are two locking systems which again work to ensure structural rigidity of the extended poles:

locking pins/buttons - the primary pole locking mechanism
friction clamps - the secondary pole locking mechanism.

The two systems are designed to work together. Spring-loaded locking buttons allow multiple length adjustments and safety friction clamps hold the extensions firmly in place. This dual locking system allows 100% of the effort at the handle to be effectively transferred to the blade.

This Silky Saw is manufactured from SK-4 carbon steel and cut out by laser. The taper-ground profile reduces drag and directs more usable energy to the cutting edge. In addition, the non-set design of teeth means they are formed inside the width of the blade – this reduces friction and enables a cleaner, faster and easier cut. Many other saws have teeth formed to project outside the width of the blade requiring much greater effort when sawing.

There are four razor sharp cutting angles on the inside of each tooth. Silky call this 'Mirai-Me' and it enables the blade to cut smoothly through the branch, significantly reducing splintering and producing a very fine smooth cut. The super fine cut destroys up to 50% less wood cells allowing the tree to heal faster and reduces the risk of disease.

The manufacturing process also uses the technique of high-frequency electro-impulse hardening during which the teeth are heated and hardened. Importantly, only the teeth are hardened, not the rest of the blade. Thus the blade retains its original flexibility whilst the teeth have a life which is up to three times longer than that of standard saws.

The Zubat Pole Saw blades are also chrome plated which helps protect against rust and sap as well as providing additional strength. This also helps extend its useful life.